HOW TO CONFIGURE A ROUTER FOR REMOTE ACCESS
To know how to configure a wireless router for remote access, carry out the how to configure a router for remote access instructions mentioned on this web page.
Netgear router:
- STEP : 1 Open the web browser from your computer that isconnected to your Netgear router.
- STEP : 2 Visit the login page of the Netgear router by entering itsIP address in the address bar.
- STEP : 3 Access the web-based setup page of the Netgear router by entering the correct user name and password in the appropriate fields.
- STEP : 4 After clicking the Advanced tab, select the Advanced Setup option followed by the Remote Management option and proceed with how to configure a router for remote access steps.
- STEP : 5 Select the checkbox beside the Turn Remote Management on option.
- STEP : 6 Click the radio button next to any one of the options that are listed here and mention the IP address.
- STEP : 7 Only this computer
- STEP : 8 IP Address Range
- STEP : 9Everyone
- STEP : 10 Fill the Port Number field and click the Apply option.
TP-Link router:
- STEP : 1
Check if you have connected your computer to the TP-Link router’s internet.
-
STEP : 2
Launch the default web browser on the computer and enter the IP address of the TP-Link router.
-
STEP : 3
As soon as you see the login web page of the TP-Link router, provide the correct information in the User Name and Password fields.
-
STEP : 4
Once you click the OK option, the web-based setup page of the TP-Link router will appear on the screen.
-
STEP : 5
Select the Security option followed by the Remote Management option on the left panel.
-
STEP : 6
Navigate to the Remote Management section, fill the Web Management Port and Remote Management IP Address fields, and click the Save option.
-
STEP : 7
Note: You are advised to change the username and password of the TP-Link router if you have enabled the Router Management feature.
D-Link router:
- STEP : 1 By using how to configure a router for remote access steps, Access the web-based management page of the D-Link router using the IP address, username, and password.
- STEP : 2 Click the Tools tab, select the Admin option on the left panel, and navigate to the Remote Management section.
- STEP : 3 Select the checkbox beside the Enable Remote Management option and mention the specific IP address in the IP Address field.
- STEP : 4 Fill the Port field and click the Save Settings option at the top of the screen.
Belkin router:
- STEP : 1 Go to the computer, launch a web browser, and enter the IP address of the Belkin router.
- STEP : 2 If prompted, enter the administrator password of the Belkin router.
- STEP : 3 This will open the dashboard of the Belkin router.
- STEP : 4 Click the Advanced Settings option, navigate to the Utilities section, and select the System Settings option.
- STEP : 5 Go to the Remote Management section and click the radio button beside the On option.
- STEP : 6 This will enable the Remote Management feature on the Belkin router.
- STEP : 7 Fill the Remote Access Port field.
- STEP : 8 Select either the ‘Any IP address can remotely manage the router’ or ‘Only this IP address can remotely manage the router’
- STEP : 9 If you choose the Only this IP address can remotely manage the router option, mention the specific IP address in this field.
On finishing how to configure a router for remote access guide to apply the changes you have made in the Belkin router’s web setup page, select the Save option.