Steps To Connecting Two Routers To The Same Network

If a single router is not sufficient for you to provide the Wi-Fi network coverage, try connecting another router to your network. The second router extends the network of the first router through a wired or wireless medium. It also creates a separate sub-network within the main network to provide a stable connection. If you want to connect the secondary router to the primary router via a wireless network, make sure the secondary router supports the bridge or repeater mode. If you have an old router and a new router, use the new one as the primary router and the old one as the secondary router. carry out the steps to connecting two routers to the same network.

Using network cable (LAN/LAN connection):

You can transfer data between the network devices via the LAN/LAN connection.

Step-1: Configure the primary router

  • Step 1:Connect the modem and the primary router’s WAN port using an Ethernet cable.
  • Step 2:Now, connect your computer to the router using another Ethernet cable or the wireless network.
  • Step 3:Open a web browser, enter the router’s IP address in the address bar, and press Enter to open the configuration page.
  • Step 4:Navigate to the network settings, configure the DHCP settings, and save the settings.
  • Step 5:Set the channel number if you are going to use the router’s wireless network.
  • Step 6:Disconnect the primary router from the computer.

Step-2: Configure the secondary router

  • Step 1:Next, connect the modem and secondary router using the Ethernet cable.
  • Step 2:Connect the computer to the secondary router.
  • Step 3:Open the secondary router’s configuration page.
  • Step 4:Under Network settings, change the IP address of the secondary router such that it lies within the IP range of the primary router.
  • Step 5:Turn off the UPnP and DHCP settings.
  • Step 6:See that the wireless channel numbers of both wireless routers are different to prevent interference.
  • Step 7:Save the router settings for connecting two routers to the same network.

Step-3: Connect both routers

  • Step 1:Remove the connection and turn off the secondary router.
  • Step 2:Now, place the routers in their positions.
  • Step 3:Use the Ethernet cable to connect the modem and the primary router (WAN port).
  • Step 4:Connect the primary router and secondary router (LAN port) using another Ethernet cable.
  • Step 5:Turn on the routers and connect multiple devices to your network. And you have successfully connecting two routers to the same network.