HOW TO BRIDGE TWO ROUTERS

You can connect the two routers in two ways, namely, using Ethernet and using wireless. To know how to bridge two routers using an Ethernet cable, follow the instructions provided below.

  • Step 1:Choose which is the main router and secondary router among the two routers.
  • Step 2:Make sure to place both the main and secondary routers closer to the computer. If needed, you can change the place of both the routers
  • Step 3:Establish a connection between the main router and the modem using an Ethernet cable.
  • Step 4:Use another Ethernet cable to establish a connection between the computer and the main router.
  • Step 5:Note: Do purchase an Ethernet to USB adapter. Use the Ethernet to USB adapter for connection establishment. Because, in Windows computer, the Ethernet ports are not available. So, you are recommended to use the Ethernet to USB adapter.
  • Step 6:Type the IP address of your main router in the web browser’s address bar to access the router’s page using this how to bridge two routers guide.
  • Step 7:The router’s web-interface page differs depending on the model of the router.
  • Step 8:Navigate to the Network Setup page and then check the IP address of your main router in the appropriate field.
  • Step 9:If you want to establish a LAN-to-LAN network, you can leave the DHCP as it is.
  • Step 3:Note down the subnet mask of the main router in the Network page.
  • Step 10:Once you have completed the main router’s configuration settings using this how to bridge two routers guide, you have to configure the secondary router.
  • Step 11:To configure the secondary router, disconnect the connection between the main router and the computer.
  • Step 12:Make a new connection between the secondary router and the computer.
  • Step 13:Access the secondary router’s web-interface page by entering the IP address of it.
  • Step 14:Find the IP address field on the Network page.
  • Step 15:Change the IP address of the secondary router. The IP address of the secondary router should be the same as the main router while following these how to bridge two routers guide.
  • Step 16:Also, the subnet mask of both the main and the secondary routers needs to be the same.
  • Step 17:Do not forget to disable the UPnP feature on the secondary router.
  • Step 18:If you want to make a LAN-to-LAN network, turn off the DHCP option on the secondary router’s interface page.
  • Step 19:Set the wireless channel range for both the main and secondary routers.
  • Step 20:Make sure the channel range for the routers are different to avoid signal interference.
  • Step 21:For example, if you set the channel range of the main router between 1 to 6, set the channel of the second router to 11.
  • Step 22:By following these how to bridge two routers guide, Connect one end of the Ethernet cable to the LAN port of the main router and another end of it to the LAN port of the secondary router.