How To Change Mac Address Filtering On A Wireless Router?

MAC Address Filtering is an option that helps you to connect specific devices to your wireless router. Using this feature, you can block or allow a device to access your network. The MAC Address of a device is used to perform the filtering process. In other words, the MAC Address Filtering option will secure your network from being accessed by unknown or unauthorized users. You can also modify the existing MAC Address Filtering settings if required. To change the existing MAC Address Filtering setting of your wireless network, follow the instructions given below to change Mac address filtering on a wireless router. If you’re performing this process, after configuring the MAC Address Filtering settings wrongly, then first, gather the correct MAC Address of all the devices.

Sign in to your router’s web access page:

Step 1:On your computer, open the default web browser.

Step 2:Type the IP address of your router in the address field.

Step 3:Now, a sign-in dialog box will appear on the screen.

Step 4:Enter your router’s credentials in the given fields.

Step 5:Click the OK button.

Step 6:Now, locate the IP & MAC Binding tab and click it.

Step 7:Select the ARP List option.

Step 8:Now, the ARP List page will open.

Step 9:In the MAC address section, you can find a list of MAC Addresses of all the devices that are connected to your router’s network.

Step 10:Click the Wireless tab followed by Wireless MAC Filtering.

Step 11:On the Wireless MAC Filtering screen, locate the MAC Address you wish to change and click the Modify command line beside it.

Step 12:Modify the required MAC Address Filtering settings as per your needs.

Step 12:Click the Save button.

Step 13:Make sure to enable the modified MAC Address.

Step 14:Contact us if you need remote assistance to change Mac address filtering on a wireless router.