HOW TO CONFIGURE QOS ON CISCO ROUTER

QoS configuration is mandatory to prioritize the network traffic of your router as per your requirement. Take a look on how to configure QoS on Cisco router guidelines to configure QOS.

ACCESSING THE CISCO ROUTER WEB-BASED SETUP PAGE

  • Step 1:Once you have launched the web browser like Internet Explorer, enter the IP address of the Cisco router in the address bar.
  • Step 2:For a few of the Cisco routers, the default IP address is 192.168.15.1.
  • Step 3:When the Cisco router’s login page opens, fill the Username and Password fields with the default credentials.
    • 1.The default user name of the Cisco router - admin
    • 2.The default password of the Cisco router - admin
  • Step 4:Select the checkbox next to the ‘Remember my password’ option if needed.
  • Step 5:Click the OK button to access the Cisco router’s web-based setup page and follow how to configure QoS on Cisco router.

QOS BASIC MODE CONFIGURATION

  • Step 1:Go to the topmost corner of the screen and select the Advanced option from the Display Mode drop-down menu.
  • Step 2:On the left panel, click the Quality of Service tab followed by the QOS Basic Mode tab.
  • Step 3:Click the radio button next to the Basic option on the main panel and then click the Apply button.
  • Step 4:Move to the Global Settings tab.
  • Step 5:In the Trust Mode section on the main panel, click the radio button beside the CoS/802.1p, DSCP or CoS/802.1p-DSCP option.
  • Step 6:Navigate to the Override Ingress DSCP section, and checkmark the box next to the Enable option and proceed with how to configure QoS on Cisco router procedure.
  • Step 7:Move the cursor to the DSCP Override Table button and then click it.
  • Step 8:Now, you can see the DSCP Override Table window with the incoming packet’s DSP value.
  • Step 9:Set the DSCP value in the appropriate fields.
  • Step 10:Click the Close button to close the DSCP Override Table window.

QOS ADVANCED MODE CONFIGURATION

  • Step 1:Click the QoS Advanced Mode tab followed by the Global Settings tab on the left panel.
  • Step 2:Set the trust mode as CoS/802.1p, DSCP, CoS/802.1p-DSCP.
  • Step 3:Go to the Default Mode Status section and then select either the Trusted or Not Trusted option.
  • Step 4:If you select the Not Trusted option, you have to set the DSCP values manually as you did in the Basic mode.
  • Step 5:Finally by using this how to configure QoS on Cisco router guidelines, click the Apply button to save the QOS settings.