How To Connect Router To Server In Packet Tracer?

Packet Tracer helps to create virtual networks and to visualize internal processes in real-time. It offers several visualizations, simulations, and authorizing capabilities to facilitate learning. To know how to connect router to server in Packet tracer, refer to the quick steps mentioned on this page.

  • Step 1: Check if your router is turned on.
  • Step 2: Download, install, and launch the Packet Tracer program on your computer.
  • Step 3: Select your router that is at the bottom-left corner of the screen. Drag the router icon to the center of the screen.
  • Step 4: Select and drag the end devices to the center of the screen. Do this again to make two computers appear below the router.
  • Step 5: Click Connections and establish a connection between the router and the computers.
  • Step 6: Once done, check if you can see the green dot. This indicates that the router is configured correctly.
  • Step 7: Navigate to the CLI tab and click the Return button.
  • Step 8: Type the following commands one after another. (for fastethernet0/0):
  • (for fastethernet0/0):
  • 1. enable
  • 2. config terminal
  • 3. interface fastetherneto/o
  • 4. ip address 192.168.10.1 255.255.255.0
  • 5. no shutdown
  • Step 9: Perform the same for fastetherneto/1 also.

Configuring the gateway on each desktop computer

  • Step 1:Click the PC0 computer to access the configuration menu.
  • Step 2:Provide your IP address correctly.
  • Step 3:Click the Fast Ethernet tab in the left panel.
  • Step 4:Set the IP address and subnet mask.
  • Step 5:Do the same for PC1 computer to set the IP address and subnet mask.
  • Step 6:Click the packet icon in the right panel.
  • Step 7:Click PC0 and PC1.
  • Step 8:If you see the ‘Successful’ message, it indicates that the router configuration is successful.
  • Step 9:Specify the IP address, default gateway, and DNS server correctly for your server in the configuration menu.

If you need assistance to know how to connect router to server in Packet tracer, get help from our technical experts.