HOW TO FIX LOS BLINKING RED?

There are several LEDs on the router panel and each LED indicates a particular status of the router. One such LED is the LOS (Loss of Signal) LED. Carry out the steps on how to fix los blinking red.

  • Step 1:The LOS light blinks red on the router when there is a loss of signal.
  • Step 2:Make sure that your Internet Service Provider (ISP) has no issues.
  • Step 3:If there are any network issues, it will be resolved when you restart the router.
  • Step 4:Ensure to keep the router and modem properly connected.
  • Step 5:Check the Ethernet cable, whether it is defective. If the cable is damaged, replace it.
  • Step 6:Remove the power cord and all the wires from the router.
  • Step 7:Leave the router unplugged for at least 60 seconds.
  • Step 8:If the router has batteries in it, remove them. 
  • Step 9:Now, connect the router to the power source and connect the modem to it using the Ethernet cable.
  • Step 10:Make sure to connect the router and modem correctly by plugging the Ethernet cable to the right port. You have to connect the Ethernet cable to the router's WAN port and fix the other end to the modem.
  • Step 11:Now, turn on the router and check whether the issue is resolved.
  • Step 12:Go to the web-based setup page of the router from a browser on your computer connected to the router.
  • Step 13:Make sure to keep your connected device within the range of the network.
  • Step 14:If you are using a Windows desktop, press the Windows and R buttons together.
  • Step 15:Open the Run dialog box. Enter cmd and click OK. 
  • Step 16:Now, type ipconfig in the Command Prompt window.
  • Step 17:You can find the IP address for the router in the Default Gateway section. Enter the IP address in the address bar of your browser to access the router’s web-based setup page.
  • Step 18:Set the required settings and enable the network connection if it is disabled.
  • Step 19:If you are still facing issues, reset the network settings.
  • Step 20:Now, restart the router on how to fix LOS blinking red issue.
  • Step 21:The LOS blinking red issue will be resolved now.