HOW TO HOOK UP MULTIPLE WIRELESS ROUTERS

  • Step 1:To connect two or more wireless routers using how to hook up multiple wireless routers guidance, you must choose a primary and a secondary router.
  • Step 2:The Primary router determines the speed of the connection, so always opt for a high range router which would act as a host.
  • Step 3:The secondary router is only used as a boost to the primary one, and this won’t slow down the basic speed of the primary one howsoever.
  • Step 4:During the initial setup, make sure to place both the wireless routers close to your computer so the basic wire setup can be made for connection.
  • Step 5:The LAN to LAN connection is recommended in this scenario because you do not want any obstructions to your Wi-Fi range, and this also can be utilized to share data or documents between computers and smartphones through the network.
  • Step 6:Use your Ethernet cables to perform the initial setup for both the wireless routers.
  • Step 7:Now, it is time to configure your router. Connect the primary router to your computer.
  • Step 8:Most of the routers can be accessed by entering the router’s IP address in the web browser.
  • Step 9:The router’s settings vary for different models, and you can always have a look at your router’s manual and proceed with how to hook up multiple wireless routers steps.
  • Step 10:On the router’s setup page, click the basic information tab on the screen.
  • Step 11:Since we are doing the LAN to LAN connection, it is not necessary to make any changes to the DHCP settings.

This sets up the primary router to the computer.

To set up the secondary router

  • Step 1:It is necessary to disconnect the primary router from the computer and make the connection to the secondary router.
  • Step 2:Once done, open the router’s page and make changes in the IP address by adding one to the second-to-last digit. Example. 198.168.1.1 becomes 198.186.2.1.
  • Step 3:Make sure that the secondary router has the same subnet mask as the primary router and proceed with how to hook up multiple wireless routers steps.
  • Step 4:You have the option of disabling the UPnP (Universal Plug and Play), which will enable wireless devices to be connected to a network known to each other.
  • Step 5:The DCHP for the secondary router must be disabled to make a connection. The secondary router can no longer assign IP addresses to the devices connected to it.
  • Step 6:Now, coming to both the routers, you can change the channel for both the primary and the secondary routers, so they don’t interfere with each other.
  • Step 7:The Primary channel can be set from any number from 1-6, and the secondary can be set to 11.
  • Step 8:Now that the connection is configured and set to multiple routers, you can place them both anywhere in your work area or your home.
  • Step 9:While completing how to hook up multiple wireless routers steps, the primary router must be placed near the modem, and the secondary can be placed anywhere within the range of the primary router.