How To Set A Wireless Router As An Access Point

You can set up your wireless router as an access point to extend its wireless network range. If you turn your wireless router into an access point, then the firewall, IP sharing, and NAT functions will be disabled by default. Carry out these how to set a wireless router as an access point steps to set up a Netgear router as an access point:

  • Step 1 :First, connect the Netgear router that you wish to change as an access point to the computer using a standard Ethernet cable.
  • Step 2 :Turn on the computer and the Netgear router.
  • Step 3 :On your PC, open the default browser and enter the Netgear router's IP address in the URL field to access the login portal.
  • Step 4 :You can identify the Netgear router's IP address from the label attached to the backside of the Netgear router.
  • Step 5 :On the Netgear login portal, enter the router’s login credentials and click the Login button to access the administrative interface.
  • Step 6 :Click the Advanced Setup tab from the left-side panel and select the Wireless Settings submenu.
  • Step 7 :Make sure that you have updated the Netgear router's firmware to the latest version.
  • Step 8 :Go to the right-side panel and scroll down the page to the AP section.
  • Step 9 :Next on following how to set a wireless router as an access point guide, check the Enable AP Mode checkbox.
  • Step 10 :The DHCP server configures the DNS server address and the access point's IP address by default.
  • Step 11 :If necessary, disable the DHCP server and configure a static IP address, IP Subnet Mask, and Gateway.
  • Step 12 :After configuring the necessary settings, click the Apply button to save the applied changes.
  • Step 13 :Next, connect the access point to the main router.
  • Step 14 :Use an Ethernet cable to connect the access point WAN/LAN port to the main router's LAN port.

Carry out these steps to set up a TP-Link router as an access point:

  • Step 1 :Before configuring the TP-Link router as an access point, identify the IP address of the router.
  • Step 2 :If you are using a Windows desktop to configure the TP-Link router's settings, then connect the TP-Link router to the computer using the wireless network credentials.
  • Step 3 :From the system tray, give a right-click on the Network icon and select the Network and Sharing Center option.
  • Step 4 :In the Network and Sharing Center window , click on your network and click the Details button.
  • Step 5 :Next, identify the default gateway from the pop-up window.
  • Step 6 :Alternatively on using how to set a wireless router as an access point steps, you can identify the default gateway using the "ipconfig" command in the Command Prompt app.
  • Step 7 :Now, connect your PC to the TP-Link router that you wish to set as an access point.
  • Step 8 :Open the default browser and enter the IP address of the connected router in the URL field.
  • Step 9 :Log in to the web-based interface using the login credentials.
  • Step 10 :Click the Advanced tab and navigate to the left-side panel and click the Operation Mode button.
  • Step 11 :Enable the Access Point radio button and click the Save button.
  • Step 12 :If prompted, click the Yes button to reboot your Wi-Fi router.
  • Step 13 :After rebooting the access point, connect it to the main router.
  • Step 14 :On using how to set a wireless router as an access point steps, Take a standard Ethernet cable and insert one of its ends into the WAN port of the access point and the other end to the LAN port of the main router.