How To Set Up A Second Router As A Bridge?

Setting up a second router as a bridge is easier if your Wi-Fi router has the Bridge mode in it. Check whether your secondary router supports bridge or repeater capabilities. To know how to set up a second router as a bridge, follow the steps mentioned below.

  • Step 1 :Turn on both the Wi-Fi routers and place them near the computer to avoid issues while setting them up.
  • Step 2 :After configuring both the router settings, you can shift them to the required places.
  • Step 3 :Connect the primary router to the modem using an Ethernet cable.
  • Step 4 :Check whether the Internet LED of the primary Wi-Fi router glows steadily.
  • Step 5 :Next, connect the primary Wi-Fi router to the computer using a standard Ethernet cable.
  • Step 6 :On your PC, open the default browser and enter the primary Wi-Fi router’s IP address in the URL field.
  • Step 7 :It will direct you to the Wi-Fi router’s login portal.
  • Step 8 :Enter the login credentials to access the router’s administrative interface. Make sure the primary router is configured, and its wireless network has been set up.
  • Step 9 :Now, connect the secondary router to the computer using another Ethernet cable.
  • Step 10 :If necessary, disconnect the primary Wi-Fi router.
  • Step 11 :Access the secondary router’s login portal by entering its IP address in the browser’s URL.
  • Step 12 :Log on to the administrative interface using your login credentials.
  • Step 13 :To identify the default login credentials, refer to the manual that comes along with the Wi-Fi router.
  • Step 14 :Go to the Wireless or Internet Setup page.
  • Step 15 :For Netgear routers, click the Advanced tab and select Advanced Setup followed by Wireless Bridge.
  • Step 16 :Enable the Bridge mode or choose the Bridged option as your connection type.
  • Step 17 :Next, configure the bridge mode wireless settings.
  • Step 18 :Select the desired name (similar to the primary routers SSID), network frequency, security option, and Wi-Fi security mode.
  • Step 19 :Enter the IP address for the secondary Wi-Fi router within the primary router’s range.
  • Step 20 :Click the Apply button to save the applied changes.
  • Step 21 :Now, the second router is configured as a bridge, and you can shift it to the place where you need to extend the Wi-Fi network.
  • Step 22 :If you aren’t able to set up the second router as a bridge, contact our technical support team. If you have any further queries regarding how to set up a second router as a bridge, click the call button.