Turn Wireless Router Into Range Extender

The range extender helps in expanding the Wi-Fi signal by a few meters, and it helps when you are running short of Wi-Fi coverage at your home so perform turn wireless router into range extender steps. It repeats the wireless message to expand the coverage. It mainly functions as a bridge when it collects signals from the primary router and broadcasts to areas where the coverage is less

Here are the steps,

  • Step 1:Open your computer and click the start button.
  • Step 2:Click the Control Panel and click on the option Network and sharing center.
  • Step 3:In the left of the window, you will see the option Change Adapter Settings, click on the option.
  • Step 4:Right-click the Wi-Fi connection option on the router setup page. 
  • Step 5:Note down the IP address of the primary router connected to the computer to turn wireless router into range extender.
  • Step 7:Now to convert wireless router into range extender, enter the IP address of the router in the search bar and hit Enter. The router’s login page .
  • Step 8:Log into the router’s home page by entering the correct credentials. You will find your Router name, channel, and Security type.
  • Step 9:Do not make any changes and check if
    • the SSID broadcast is enabled.
    • WPA2-PSK (AES) radio button is clicked.
  • Step 10:Log out from your primary router.
  • Step 11:Take out the secondary router.
  • Step 12:You must perform a hard reset by inserting a paperclip into the Reset button into the whole of the secondary router.
  • Step 13:Press and hold the reset button for half a minute.
  • Step 14:You can release the paperclip once you see all the lights on the router power on.
  • Step 15:Log in to your Wi-Fi settings page.
  • Step 16:Enable the wireless connection and change the network name to the same as the primary router to turn wireless router into range extender.
  • Step 17:Choose a channel from the primary channel so there will not be any interference among signals.
  • Step 18:You can assign the password of your primary router to your secondary router.
  • Step 19:Now to convert wireless router into range extender, log in to your router setup page and give an IP address in the range assigned by the primary router.
  • Step 20:Disable the DHCP (Dynamic Hosts Communication Protocol)/
  • Step 21:Now, give a new address by changing the last numbers of the IP. For example, if the primary IP is 192.168.1.2, change the latest name to 192.168.1.59.
  • Step 22:Click Save Settings and wait for the router to reboot.
  • Step 23:Now to turn wireless router into range extender, it is time to check if the settings you have entered are working.
  • Step 24:Pick up a dead spot where you do not get a signal from the primary router.
  • Step 25:Plug the adapter in the wall and make a connection with the adapter using an Ethernet cord.
  • Step 26:Now turn on your extender router to try the connection.
  • Step 27:After you turn wireless router into range extender, perform a speed test to see if the range is coming from the extender router.